FX-Alene
FX-Alene
FX-Alene (Plant-Based Petrolatum Alternative)
FX-Alene is a plant-based alternative to petroleum jelly. It is a thick, smooth, rich emollient that forms a protective layer on the skin and helps reduce moisture loss, without using petroleum.
Use it on its own on dry areas, lips and hands, or add it to creams, lotions, balms and hair products to give richness, body and an occlusive feel. We supply it in packs from 50 g up to 5 kg.
|
Plant-based Petrolatum alternative |
Occlusive, protective Rich, smooth feel |
Creams, balms, hair Use at 1-10% |
50 g to 5 kg Six pack sizes |
Safety information: for external (cosmetic) use only. Keep out of reach of children. Patch test before first use and stop using if irritation occurs. See Safety below and the Safety Data Sheet in the Product Documents section at the end of this page.
Specifications
| Specification | Detail |
|---|---|
| Product | FX-Alene |
| Type | Plant-based petrolatum alternative, emollient and occlusive |
| Appearance | Thick, smooth, balm-like semi-solid |
| Solubility | Oil soluble. Blends with oils and butters |
| pH compatibility | Described as compatible with a wide pH range (about 3-12) |
| Typical use rates | About 2-10% as a moisturiser and occlusive in creams and lotions, about 1-4% as a co-emulsifier and stabiliser, and about 1-5% in hair masks and leave-ins. Test your own recipe |
| Suitable for | Balms, ointments, lip care, creams, lotions, hair care, massage balms |
| Pack Sizes | 50 g, 100 g, 300 g, 500 g, 1.8 kg, 5 kg |
| Storage | Sealed, cool and dry, away from heat and sunlight |
| Use | Raw material for makers. Formulation, safety assessment and labelling of finished products are the maker's responsibility. Not for internal use |
Uses
| Use | How it is used |
|---|---|
| On its own | Apply a small amount to dry, rough areas, lips and hands to help protect the skin and reduce moisture loss |
| Creams and lotions | Adds richness and an occlusive feel. About 2-10% |
| Balms and ointments | Use as the base for protective balms and massage balms. Test your own recipe |
| Co-emulsifier and stabiliser | Used with emulsifiers at about 1-4% to add body. Test your own recipe |
| Hair masks and leave-ins | About 1-5% to smooth dry or frizzy hair. Test your own recipe |
| Lip care | A rich base for lip balms. Test the feel |
How to Use FX-Alene in a Simple Balm
- Weigh. Weigh the FX-Alene with your oils and butters. For a simple balm, start with FX-Alene as a large share of the base.
- Melt. Melt the ingredients gently together in a double boiler, stirring until smooth.
- Cool a little. Take off the heat. Add heat-sensitive ingredients such as lavender essential oil or vitamin E once the mix has cooled a little.
- Pour. Pour into clean tins or jars before it sets.
- Set. Leave to set undisturbed, away from draughts.
- Test. Check the firmness and feel, then adjust the ratios in the next batch.
Tip: Make a small test batch first. FX-Alene balms feel different from beeswax balms, so adjust waxes and oils a little at a time.
Using It in Creams, Balms & Hair Care ▼
These are common maker starting points, not fixed rules. Results vary with your recipe, so always test a small batch first.
| Use | Starting amount | Notes |
|---|---|---|
| Creams and lotions | About 2-10% | Add to the oil phase. Gives richness and an occlusive feel. |
| Co-emulsifier and stabiliser | About 1-4% | Use with an emulsifier to add body. |
| Balms and ointments | Higher rates, as set by your recipe | Combine with oils and waxes. Test the firmness. |
| Hair masks and leave-ins | About 1-5% | Test the feel on hair so it does not weigh it down. |
| Lip balms | As set by your recipe | Combine with waxes and butters. Test the feel. |
Tips & Troubleshooting ▼
| Problem | Likely cause | What to try |
|---|---|---|
| Balm feels too greasy | Rate too high | Reduce the FX-Alene or add a little more wax. |
| Balm too soft | Not enough wax | Add a little Castor Wax Flakes or beeswax, a small amount at a time. |
| Cream feels heavy | Rate too high | Reduce to the lower end of the 2-10% range. |
| Grainy texture | Cooled too slowly or unevenly | Melt fully, stir well and cool undisturbed. |
| Hair feels weighed down | Rate too high | Use less, or apply to the ends only. |
| Skin feels irritated | Reaction to the formula | Patch test and stop use if irritation occurs. |
Safety & Selling Your Products ▼
This product is a cosmetic raw material for external use only. Do not swallow it, keep it out of reach of children and keep it away from the eyes. Melted ingredients are hot and can burn, so never heat over a direct flame and never leave them unattended. Patch test finished products before first use and stop using a product if irritation occurs.
FX-Alene is rich and occlusive. Use it sparingly on skin that is prone to congestion, and patch test before use. Water-based products made with it need a suitable preservative.
Selling what you make? This is a raw material for makers. The formulation, preservation, safety assessment, labelling and any regulatory requirements for your finished cosmetics or soap (including the NZ cosmetic rules) are your responsibility, and health or treatment claims should not be made for your products. Contact us at info@purefx.co.nz if you need product information.
Frequently Asked Questions ▼
What is FX-Alene?
It is a plant-based alternative to petroleum jelly that forms a protective, occlusive layer on the skin.
How much do I use?
About 2-10% in creams and lotions, 1-4% as a co-emulsifier or stabiliser and 1-5% in hair products. Always test.
Can I use it on its own?
Yes. It can be applied to dry areas, lips and hands. Patch test first.
Is it a petrolatum replacement?
It is used as a plant-based alternative to petroleum jelly. Test your own recipe, as it will not behave identically.
Can I use it in hair care?
Yes, at about 1-5% in masks and leave-ins. Test it, as it can weigh down fine hair.
Do I need a preservative?
For water-based products, yes. Pure FX-Alene balms contain no water.
How should I store it?
Sealed, in a cool, dry place away from heat and sunlight.
Is it for internal use?
No. It is sold for external cosmetic use only.
Sizes & Price
| Pack | Price | Price per 100 g |
|---|---|---|
| 50 g | $5.50 | $11.00 |
| 100 g | $7.25 | $7.25 |
| 300 g | $12.50 | $4.17 |
| 500 g | $18.00 | $3.60 |
| 1.8 kg | $56.00 | $3.11 |
| 5 kg | $145.00 | $2.90 |
Pairs Well With
Pair with shea butter, cocoa butter, beeswax and Castor Wax Flakes, and add lavender essential oil or Roman chamomile essential oil. Use with Coco Caprylate or Emulsifying Wax (Neowax B200). For massage see our massage creams. Browse the FX-Alene collection and emulsifiers and thickeners. |
 Product Documents
|
Couldn't load pickup availability
FX-Alene (Plant-Based Petrolatum Alternative)
FX-Alene is a plant-based alternative to petroleum jelly. It is a thick, smooth, rich emollient that forms a protective layer on the skin and helps reduce moisture loss, without using petroleum.
Use it on its own on dry areas, lips and hands, or add it to creams, lotions, balms and hair products to give richness, body and an occlusive feel. We supply it in packs from 50 g up to 5 kg.
|
Plant-based Petrolatum alternative |
Occlusive, protective Rich, smooth feel |
Creams, balms, hair Use at 1-10% |
50 g to 5 kg Six pack sizes |
Safety information: for external (cosmetic) use only. Keep out of reach of children. Patch test before first use and stop using if irritation occurs. See Safety below and the Safety Data Sheet in the Product Documents section at the end of this page.
Specifications
| Specification | Detail |
|---|---|
| Product | FX-Alene |
| Type | Plant-based petrolatum alternative, emollient and occlusive |
| Appearance | Thick, smooth, balm-like semi-solid |
| Solubility | Oil soluble. Blends with oils and butters |
| pH compatibility | Described as compatible with a wide pH range (about 3-12) |
| Typical use rates | About 2-10% as a moisturiser and occlusive in creams and lotions, about 1-4% as a co-emulsifier and stabiliser, and about 1-5% in hair masks and leave-ins. Test your own recipe |
| Suitable for | Balms, ointments, lip care, creams, lotions, hair care, massage balms |
| Pack Sizes | 50 g, 100 g, 300 g, 500 g, 1.8 kg, 5 kg |
| Storage | Sealed, cool and dry, away from heat and sunlight |
| Use | Raw material for makers. Formulation, safety assessment and labelling of finished products are the maker's responsibility. Not for internal use |
Uses
| Use | How it is used |
|---|---|
| On its own | Apply a small amount to dry, rough areas, lips and hands to help protect the skin and reduce moisture loss |
| Creams and lotions | Adds richness and an occlusive feel. About 2-10% |
| Balms and ointments | Use as the base for protective balms and massage balms. Test your own recipe |
| Co-emulsifier and stabiliser | Used with emulsifiers at about 1-4% to add body. Test your own recipe |
| Hair masks and leave-ins | About 1-5% to smooth dry or frizzy hair. Test your own recipe |
| Lip care | A rich base for lip balms. Test the feel |
How to Use FX-Alene in a Simple Balm
- Weigh. Weigh the FX-Alene with your oils and butters. For a simple balm, start with FX-Alene as a large share of the base.
- Melt. Melt the ingredients gently together in a double boiler, stirring until smooth.
- Cool a little. Take off the heat. Add heat-sensitive ingredients such as lavender essential oil or vitamin E once the mix has cooled a little.
- Pour. Pour into clean tins or jars before it sets.
- Set. Leave to set undisturbed, away from draughts.
- Test. Check the firmness and feel, then adjust the ratios in the next batch.
Tip: Make a small test batch first. FX-Alene balms feel different from beeswax balms, so adjust waxes and oils a little at a time.
Using It in Creams, Balms & Hair Care ▼
These are common maker starting points, not fixed rules. Results vary with your recipe, so always test a small batch first.
| Use | Starting amount | Notes |
|---|---|---|
| Creams and lotions | About 2-10% | Add to the oil phase. Gives richness and an occlusive feel. |
| Co-emulsifier and stabiliser | About 1-4% | Use with an emulsifier to add body. |
| Balms and ointments | Higher rates, as set by your recipe | Combine with oils and waxes. Test the firmness. |
| Hair masks and leave-ins | About 1-5% | Test the feel on hair so it does not weigh it down. |
| Lip balms | As set by your recipe | Combine with waxes and butters. Test the feel. |
Tips & Troubleshooting ▼
| Problem | Likely cause | What to try |
|---|---|---|
| Balm feels too greasy | Rate too high | Reduce the FX-Alene or add a little more wax. |
| Balm too soft | Not enough wax | Add a little Castor Wax Flakes or beeswax, a small amount at a time. |
| Cream feels heavy | Rate too high | Reduce to the lower end of the 2-10% range. |
| Grainy texture | Cooled too slowly or unevenly | Melt fully, stir well and cool undisturbed. |
| Hair feels weighed down | Rate too high | Use less, or apply to the ends only. |
| Skin feels irritated | Reaction to the formula | Patch test and stop use if irritation occurs. |
Safety & Selling Your Products ▼
This product is a cosmetic raw material for external use only. Do not swallow it, keep it out of reach of children and keep it away from the eyes. Melted ingredients are hot and can burn, so never heat over a direct flame and never leave them unattended. Patch test finished products before first use and stop using a product if irritation occurs.
FX-Alene is rich and occlusive. Use it sparingly on skin that is prone to congestion, and patch test before use. Water-based products made with it need a suitable preservative.
Selling what you make? This is a raw material for makers. The formulation, preservation, safety assessment, labelling and any regulatory requirements for your finished cosmetics or soap (including the NZ cosmetic rules) are your responsibility, and health or treatment claims should not be made for your products. Contact us at info@purefx.co.nz if you need product information.
Frequently Asked Questions ▼
What is FX-Alene?
It is a plant-based alternative to petroleum jelly that forms a protective, occlusive layer on the skin.
How much do I use?
About 2-10% in creams and lotions, 1-4% as a co-emulsifier or stabiliser and 1-5% in hair products. Always test.
Can I use it on its own?
Yes. It can be applied to dry areas, lips and hands. Patch test first.
Is it a petrolatum replacement?
It is used as a plant-based alternative to petroleum jelly. Test your own recipe, as it will not behave identically.
Can I use it in hair care?
Yes, at about 1-5% in masks and leave-ins. Test it, as it can weigh down fine hair.
Do I need a preservative?
For water-based products, yes. Pure FX-Alene balms contain no water.
How should I store it?
Sealed, in a cool, dry place away from heat and sunlight.
Is it for internal use?
No. It is sold for external cosmetic use only.
Sizes & Price
| Pack | Price | Price per 100 g |
|---|---|---|
| 50 g | $5.50 | $11.00 |
| 100 g | $7.25 | $7.25 |
| 300 g | $12.50 | $4.17 |
| 500 g | $18.00 | $3.60 |
| 1.8 kg | $56.00 | $3.11 |
| 5 kg | $145.00 | $2.90 |
Pairs Well With
Pair with shea butter, cocoa butter, beeswax and Castor Wax Flakes, and add lavender essential oil or Roman chamomile essential oil. Use with Coco Caprylate or Emulsifying Wax (Neowax B200). For massage see our massage creams. Browse the FX-Alene collection and emulsifiers and thickeners. |
|
Product Documents
|
