Fuller's Earth Clay Powder
Fuller's Earth Clay Powder
Fuller's Earth Clay Powder (Multani Mitti)
Fuller's Earth, also known as Multani Mitti, is a fine absorbent clay that has been used in traditional skin and hair care for a very long time. It is a favourite for oil-absorbing masks and clay hair washes.
It mixes easily with water, rose water, oils, herbs and other clays, so it is easy to adapt to different skin types. Makers also use it in dry shampoos, powders and soap.
|
Absorbent clay Multani Mitti |
Oil-absorbing Masks and hair washes |
Mixes with herbs and oils Easy to customise |
100 g to 500 g Three pack sizes |
Safety information: for external (cosmetic) use only. Keep out of reach of children, keep away from the eyes, patch test before first use and avoid breathing in the dust. See Safety below and the Safety Data Sheet in the Product Documents section at the end of this page.
Specifications
| Specification | Detail |
|---|---|
| Product | Fuller's Earth Clay Powder |
| Also known as | Multani Mitti |
| Type | Absorbent clay powder |
| Appearance | Fine powder. Cream to buff, colour varies by batch |
| Behaviour | Absorbs oil and moisture |
| Suitable for | Masks, hair masks and washes, dry shampoo blends, powders, soap, scrubs |
| Not suitable for | Internal use. Do not use on broken skin |
| Pack Sizes | 100 g, 250 g, 500 g |
| Storage | Sealed, cool and dry, away from moisture. Avoid metal containers |
| Use | Raw material for makers. Formulation, safety assessment and labelling of finished products are the maker's responsibility |
Uses
| Use | How it is used |
|---|---|
| Face masks | Mix with water, rose water or a hydrosol. A traditional choice for oily skin masks |
| Hair masks and washes | Mix to a paste and use as a clay hair wash, or add to a hair mask |
| Dry shampoo blends | Blend dry with other powders to absorb oil at the roots |
| Powders | Use as an absorbent base in body powders |
| Soap | Mix to a paste first and add to the soap base |
| Scrubs | Mix into salt or sugar scrub bases |
How to Make a Simple Fuller's Earth Face Mask
- Start clean. Wash and dry your face and tie your hair back. Protect your clothing, as clay can stain.
- Mix the clay. In a glass, ceramic or plastic bowl, stir 1 tablespoon of Fuller's earth with 1-2 tablespoons of water or a hydrosol until you have a smooth paste. A few drops of a carrier oil such as apricot kernel oil will make it creamier. Use a wooden or plastic spoon rather than metal.
- Patch test. Try a little on the inside of your arm first and wait to see how your skin reacts.
- Apply. Spread a thin, even layer over clean skin, avoiding the eyes, lips and any broken or irritated skin.
- Leave it on. Leave for about 5-10 minutes. Rinse off while the mask is still slightly damp rather than letting it dry hard and crack.
- Rinse and moisturise. Rinse with warm water or a warm damp cloth, pat dry and follow with your usual moisturiser. Start with once a week and see how your skin feels.
Using It in Soap, Bath & Scrubs ▼
These are common maker starting points, not fixed rules. Results vary with your recipe, so always test a small batch first.
| Use | Starting amount | Notes |
|---|---|---|
| Face mask | 1 tbsp clay + 1-2 tbsp water or hydrosol | Add a few drops of carrier oil for a creamier mask. Rinse before it dries completely. |
| Body wrap or paste | 2-3 tbsp clay + water to a spreadable paste | Apply to the body and rinse off after about 10 minutes. |
| Bath | 1/4-1/2 cup per bath | Sprinkle in while the bath runs, or pre-mix into a paste. Use a mesh bag or rinse the tub well afterwards. |
| Cold process soap | About 1 tsp-1 tbsp per 500 g of soap oils | Stir into a little oil first, then add at light trace. Fuller's earth gives a soft cream to beige tone. |
| Melt and pour soap | About 1 tsp-1 tbsp per 500 g of base | Mix to a paste with a little vegetable glycerine first, then stir into the melted base. Too much can make a soap feel dry or dull. |
| Bath bombs | About 1 tbsp per 500 g of dry mix | Mix through the dry ingredients until the colour is even. Can stain tubs lightly. |
| Scrubs | 1-2 tbsp per cup of sugar or salt scrub base | Mix into the base with your chosen oil. |
See the cosmetic making supplies collection for oils, butters and bases to formulate with.
Tips & Troubleshooting ▼
| Problem | Likely cause | What to try |
|---|---|---|
| Clumps when mixing | Liquid poured onto dry clay | Sprinkle the clay onto the liquid instead and let it sit for a minute before stirring. |
| Mask dries hard and feels tight | Left on too long, or too little liquid | Rinse while still slightly damp, use a little more water or a few drops of carrier oil, and moisturise afterwards. |
| Skin looks red or feels sore | Sensitivity to clay or an added ingredient | Rinse with cool water. Patch test before use, keep the first sessions short, and stop if irritation continues. |
| Colour changes in soap | Clays can shift in colour in lye or with heat | Test a small batch. Mixing the clay with a little oil or glycerine first helps it blend evenly. |
| Specks or streaks in soap | Clay not fully mixed in | Mix to a smooth paste before adding, then stick-blend or stir well. |
| Mix spoils or smells off | Water-based mixes can grow mould | Mix fresh and use straight away, and discard leftovers. Add a suitable preservative to anything you plan to keep. |
| Blocked drain | Clay settling in pipes | Wipe off with a cloth where you can, use a strainer, and run plenty of water after a bath. |
Safety & Selling Your Products ▼
This product is a cosmetic raw material for external use only. Do not swallow it, keep it out of reach of children, keep it away from the eyes and do not use it on broken or irritated skin. Fine powders can irritate the airways, so wear a dust mask when weighing or pouring and avoid creating dust clouds. Do a patch test before first use and stop using it if irritation occurs.
Mix clays in glass, ceramic, plastic or wooden bowls and tools, and avoid metal. Store sealed in a cool, dry place away from moisture and direct sunlight. Do not rinse large amounts of mask, bath or scrub down the sink, as clay can settle and block drains. Wipe it off with a cloth and put it in the bin, or use a strainer.
Selling what you make? This is a raw material for makers. The formulation, preservation, safety assessment, labelling and any regulatory requirements for your finished cosmetics or soap (including the NZ cosmetic rules) are your responsibility, and health or treatment claims should not be made for your products. Contact us at info@purefx.co.nz if you need product information.
Frequently Asked Questions ▼
What is Multani Mitti?
It is another name for Fuller's earth, a traditional absorbent clay used in skin and hair care.
Can I use it on my hair?
Many makers use it in clay hair masks and washes. Test first, rinse well, and use a conditioner or oil afterwards if your hair feels dry.
Will it make my skin dry?
It is very absorbent, so use a little oil or hydrosol in the mix and moisturise after. Everyone's skin differs, so patch test first.
Can I eat it or use it internally?
No. It is sold for external cosmetic use only.
Sizes & Price
| Pack | Price | Price per 100 g |
|---|---|---|
| 100 g | $10.00 | $10.00 |
| 250 g | $21.00 | $8.40 |
| 500 g | $39.00 | $7.80 |
Pairs Well With
Pair with ghassoul clay, bentonite clay or kaolin clay, and add lavender essential oil or tea tree essential oil. Mix a mask with hydrosol or lavender hydrosol and a little jojoba oil. Browse all clays and cosmetic powders. |
 Product Documents
|
Couldn't load pickup availability
Fuller's Earth Clay Powder (Multani Mitti)
Fuller's Earth, also known as Multani Mitti, is a fine absorbent clay that has been used in traditional skin and hair care for a very long time. It is a favourite for oil-absorbing masks and clay hair washes.
It mixes easily with water, rose water, oils, herbs and other clays, so it is easy to adapt to different skin types. Makers also use it in dry shampoos, powders and soap.
|
Absorbent clay Multani Mitti |
Oil-absorbing Masks and hair washes |
Mixes with herbs and oils Easy to customise |
100 g to 500 g Three pack sizes |
Safety information: for external (cosmetic) use only. Keep out of reach of children, keep away from the eyes, patch test before first use and avoid breathing in the dust. See Safety below and the Safety Data Sheet in the Product Documents section at the end of this page.
Specifications
| Specification | Detail |
|---|---|
| Product | Fuller's Earth Clay Powder |
| Also known as | Multani Mitti |
| Type | Absorbent clay powder |
| Appearance | Fine powder. Cream to buff, colour varies by batch |
| Behaviour | Absorbs oil and moisture |
| Suitable for | Masks, hair masks and washes, dry shampoo blends, powders, soap, scrubs |
| Not suitable for | Internal use. Do not use on broken skin |
| Pack Sizes | 100 g, 250 g, 500 g |
| Storage | Sealed, cool and dry, away from moisture. Avoid metal containers |
| Use | Raw material for makers. Formulation, safety assessment and labelling of finished products are the maker's responsibility |
Uses
| Use | How it is used |
|---|---|
| Face masks | Mix with water, rose water or a hydrosol. A traditional choice for oily skin masks |
| Hair masks and washes | Mix to a paste and use as a clay hair wash, or add to a hair mask |
| Dry shampoo blends | Blend dry with other powders to absorb oil at the roots |
| Powders | Use as an absorbent base in body powders |
| Soap | Mix to a paste first and add to the soap base |
| Scrubs | Mix into salt or sugar scrub bases |
How to Make a Simple Fuller's Earth Face Mask
- Start clean. Wash and dry your face and tie your hair back. Protect your clothing, as clay can stain.
- Mix the clay. In a glass, ceramic or plastic bowl, stir 1 tablespoon of Fuller's earth with 1-2 tablespoons of water or a hydrosol until you have a smooth paste. A few drops of a carrier oil such as apricot kernel oil will make it creamier. Use a wooden or plastic spoon rather than metal.
- Patch test. Try a little on the inside of your arm first and wait to see how your skin reacts.
- Apply. Spread a thin, even layer over clean skin, avoiding the eyes, lips and any broken or irritated skin.
- Leave it on. Leave for about 5-10 minutes. Rinse off while the mask is still slightly damp rather than letting it dry hard and crack.
- Rinse and moisturise. Rinse with warm water or a warm damp cloth, pat dry and follow with your usual moisturiser. Start with once a week and see how your skin feels.
Using It in Soap, Bath & Scrubs ▼
These are common maker starting points, not fixed rules. Results vary with your recipe, so always test a small batch first.
| Use | Starting amount | Notes |
|---|---|---|
| Face mask | 1 tbsp clay + 1-2 tbsp water or hydrosol | Add a few drops of carrier oil for a creamier mask. Rinse before it dries completely. |
| Body wrap or paste | 2-3 tbsp clay + water to a spreadable paste | Apply to the body and rinse off after about 10 minutes. |
| Bath | 1/4-1/2 cup per bath | Sprinkle in while the bath runs, or pre-mix into a paste. Use a mesh bag or rinse the tub well afterwards. |
| Cold process soap | About 1 tsp-1 tbsp per 500 g of soap oils | Stir into a little oil first, then add at light trace. Fuller's earth gives a soft cream to beige tone. |
| Melt and pour soap | About 1 tsp-1 tbsp per 500 g of base | Mix to a paste with a little vegetable glycerine first, then stir into the melted base. Too much can make a soap feel dry or dull. |
| Bath bombs | About 1 tbsp per 500 g of dry mix | Mix through the dry ingredients until the colour is even. Can stain tubs lightly. |
| Scrubs | 1-2 tbsp per cup of sugar or salt scrub base | Mix into the base with your chosen oil. |
See the cosmetic making supplies collection for oils, butters and bases to formulate with.
Tips & Troubleshooting ▼
| Problem | Likely cause | What to try |
|---|---|---|
| Clumps when mixing | Liquid poured onto dry clay | Sprinkle the clay onto the liquid instead and let it sit for a minute before stirring. |
| Mask dries hard and feels tight | Left on too long, or too little liquid | Rinse while still slightly damp, use a little more water or a few drops of carrier oil, and moisturise afterwards. |
| Skin looks red or feels sore | Sensitivity to clay or an added ingredient | Rinse with cool water. Patch test before use, keep the first sessions short, and stop if irritation continues. |
| Colour changes in soap | Clays can shift in colour in lye or with heat | Test a small batch. Mixing the clay with a little oil or glycerine first helps it blend evenly. |
| Specks or streaks in soap | Clay not fully mixed in | Mix to a smooth paste before adding, then stick-blend or stir well. |
| Mix spoils or smells off | Water-based mixes can grow mould | Mix fresh and use straight away, and discard leftovers. Add a suitable preservative to anything you plan to keep. |
| Blocked drain | Clay settling in pipes | Wipe off with a cloth where you can, use a strainer, and run plenty of water after a bath. |
Safety & Selling Your Products ▼
This product is a cosmetic raw material for external use only. Do not swallow it, keep it out of reach of children, keep it away from the eyes and do not use it on broken or irritated skin. Fine powders can irritate the airways, so wear a dust mask when weighing or pouring and avoid creating dust clouds. Do a patch test before first use and stop using it if irritation occurs.
Mix clays in glass, ceramic, plastic or wooden bowls and tools, and avoid metal. Store sealed in a cool, dry place away from moisture and direct sunlight. Do not rinse large amounts of mask, bath or scrub down the sink, as clay can settle and block drains. Wipe it off with a cloth and put it in the bin, or use a strainer.
Selling what you make? This is a raw material for makers. The formulation, preservation, safety assessment, labelling and any regulatory requirements for your finished cosmetics or soap (including the NZ cosmetic rules) are your responsibility, and health or treatment claims should not be made for your products. Contact us at info@purefx.co.nz if you need product information.
Frequently Asked Questions ▼
What is Multani Mitti?
It is another name for Fuller's earth, a traditional absorbent clay used in skin and hair care.
Can I use it on my hair?
Many makers use it in clay hair masks and washes. Test first, rinse well, and use a conditioner or oil afterwards if your hair feels dry.
Will it make my skin dry?
It is very absorbent, so use a little oil or hydrosol in the mix and moisturise after. Everyone's skin differs, so patch test first.
Can I eat it or use it internally?
No. It is sold for external cosmetic use only.
Sizes & Price
| Pack | Price | Price per 100 g |
|---|---|---|
| 100 g | $10.00 | $10.00 |
| 250 g | $21.00 | $8.40 |
| 500 g | $39.00 | $7.80 |
Pairs Well With
Pair with ghassoul clay, bentonite clay or kaolin clay, and add lavender essential oil or tea tree essential oil. Mix a mask with hydrosol or lavender hydrosol and a little jojoba oil. Browse all clays and cosmetic powders. |
|
Product Documents
|
