Candle Wick Holder Steel Reusable
Candle Wick Holder Steel Reusable
Candle Wick Holder, Steel Reusable (Centres Your Wick While You Pour)
Our steel wick holder is a must-have for candle makers. It holds your wick straight and taut in the container while you pour and while the wax sets, so the wick finishes up centred every time.
Grooves on each arm sit securely inside the jar, and three keyholes lock the wick in place without any extra fastening. The two outer keyholes are ideal for double wicking. It is reusable, so one holder serves batch after batch.
|
Steel Sturdy and reusable |
3 keyholes Locks the wick in place |
Grooved arms Sit securely in the jar |
Double wicking Use the two outer keyholes |
Safety information: tool for candle making only. Keep out of reach of children and wipe off any wax before storing. See Safety below.
Specifications
| Specification | Detail |
|---|---|
| Product | Candle Wick Holder, Steel, Reusable |
| Material | Steel |
| Reusable | Yes |
| Keyholes | 3 (the two outer keyholes suit double wicking) |
| Fit | Grooves on each arm sit inside the candle jar |
| Use | Holding the wick centred and taut while you pour and while the wax sets |
How to Use
- Fix the wick. Secure the base of your tabbed wick to the centre of the jar with a wick stickum or a dab of hot glue.
- Place the holder. Rest the holder across the top of the jar with the grooves on the arms sitting inside the container.
- Lock the wick. Slide the top of the wick into the centre keyhole and pull it gently taut. For a double wick, use the two outer keyholes.
- Pour. Pour your wax at its recommended pouring temperature and leave the candle to set undisturbed.
- Remove. Once the wax has set, lift off the holder and trim the wick before the first burn.
Safety & Selling Your Products ▼
Keep out of reach of children. Molten wax can burn badly: never heat it over a direct flame, never leave it unattended and do not use water on a wax fire. Never leave a burning candle unattended, and keep candles away from children, pets, draughts and anything flammable.
Selling your candles? This is a raw material or tool for makers. Burn testing, labelling and any regulatory requirements for your finished candles are your responsibility. Contact us at info@purefx.co.nz if you need product information.
Frequently Asked Questions ▼
Is it reusable?
Yes. It is steel, so wipe off any wax and use it again.
Can I use it for double wicking?
Yes. The two outer keyholes are designed for double wicking.
What wicks do I use with it?
Any tabbed wick that suits your jar, such as our pre-tabbed CDN and ECO wicks. See each listing's size guide.
Will it fit my jar?
The grooved arms are designed to sit inside the container. Check it on your jar before you pour a batch.
Sizes & Price
| Product | Price |
|---|---|
| Candle Wick Holder, Steel, Reusable | $1.50 |
Pairs Well With
Use with pre-tabbed wicks, fixed with wick stickums. Pour soy wax into candle jars, then keep your wicks tidy with a wick trimmer. |
Couldn't load pickup availability
Candle Wick Holder, Steel Reusable (Centres Your Wick While You Pour)
Our steel wick holder is a must-have for candle makers. It holds your wick straight and taut in the container while you pour and while the wax sets, so the wick finishes up centred every time.
Grooves on each arm sit securely inside the jar, and three keyholes lock the wick in place without any extra fastening. The two outer keyholes are ideal for double wicking. It is reusable, so one holder serves batch after batch.
|
Steel Sturdy and reusable |
3 keyholes Locks the wick in place |
Grooved arms Sit securely in the jar |
Double wicking Use the two outer keyholes |
Safety information: tool for candle making only. Keep out of reach of children and wipe off any wax before storing. See Safety below.
Specifications
| Specification | Detail |
|---|---|
| Product | Candle Wick Holder, Steel, Reusable |
| Material | Steel |
| Reusable | Yes |
| Keyholes | 3 (the two outer keyholes suit double wicking) |
| Fit | Grooves on each arm sit inside the candle jar |
| Use | Holding the wick centred and taut while you pour and while the wax sets |
How to Use
- Fix the wick. Secure the base of your tabbed wick to the centre of the jar with a wick stickum or a dab of hot glue.
- Place the holder. Rest the holder across the top of the jar with the grooves on the arms sitting inside the container.
- Lock the wick. Slide the top of the wick into the centre keyhole and pull it gently taut. For a double wick, use the two outer keyholes.
- Pour. Pour your wax at its recommended pouring temperature and leave the candle to set undisturbed.
- Remove. Once the wax has set, lift off the holder and trim the wick before the first burn.
Safety & Selling Your Products ▼
Keep out of reach of children. Molten wax can burn badly: never heat it over a direct flame, never leave it unattended and do not use water on a wax fire. Never leave a burning candle unattended, and keep candles away from children, pets, draughts and anything flammable.
Selling your candles? This is a raw material or tool for makers. Burn testing, labelling and any regulatory requirements for your finished candles are your responsibility. Contact us at info@purefx.co.nz if you need product information.
Frequently Asked Questions ▼
Is it reusable?
Yes. It is steel, so wipe off any wax and use it again.
Can I use it for double wicking?
Yes. The two outer keyholes are designed for double wicking.
What wicks do I use with it?
Any tabbed wick that suits your jar, such as our pre-tabbed CDN and ECO wicks. See each listing's size guide.
Will it fit my jar?
The grooved arms are designed to sit inside the container. Check it on your jar before you pour a batch.
Sizes & Price
| Product | Price |
|---|---|
| Candle Wick Holder, Steel, Reusable | $1.50 |
Pairs Well With
Use with pre-tabbed wicks, fixed with wick stickums. Pour soy wax into candle jars, then keep your wicks tidy with a wick trimmer. |
